Affects Pi4 only
If you have a Pi4 and are using a RTL-SDR dongle without any data flow, this could be a problem with the Pi4 kernel and not the FR24 feeder itself.
You can confirm this by installing rtl-sdr package
$sudo apt update $sudo apt install rtl-sdr
Run the test
#stop fr24feed first $sudo systemctl stop fr24feed
$rtl_test
Using device 0: Generic RTL2832U OEM
rtlsdr_read_reg failed with -7
rtlsdr_write_reg failed with -7
rtlsdr_read_reg failed with -7
rtlsdr_write_reg failed with -7
rtlsdr_read_reg failed with -7
If you get a similar out, you need to upgrade the Pi's firmware. Run the following command and reboot the pi after the upgrade is complete
$sudo rpi-update
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article